负载茜素红S的纳米磁性碳粉修饰电极测定牛白蛋白

采用化学沉积法在纳米碳粉上合成磁性Fe3O4颗粒,纳米碳粉吸附茜素红S后通过磁力附着在石墨电极上,制成了负载茜素红S的纳米磁性碳粉修饰电极。研究了该电极在0.014 mol/L H2SO4-0.2 mol/L KC l溶液中对ARS-牛白蛋白的电还原作用,考察了多种实验条件对峰电流的影响。在-0.45 V电位下,牛白蛋白浓度在1.5×10-8~9×10-7mol/L范围内与线性扫描伏安法还原电流成反比,从而实现对牛白蛋白的测定,并初步研究了电化学反应机理。此方法制成的磁性纳米颗粒修饰电极集分离、富集、测定和更新于一体,具有更新方便的特点。     

司帕沙星与茜素红荷移反应的研究

采用紫外分光光度法研究了π电子受体茜素红与电子给予体司帕沙星的荷移反应。确定了反应条件,建立了一种快速简便灵敏准确测定司帕沙星的荷移分光光度法。结果表明,司帕沙星与茜素红在(4+6)乙醇-水介质中,室温条件下即可形成1∶1稳定的荷移络合物,该络合物的最大吸收波长为530 nm,表观摩尔吸光系数为4.8×103L.mol-1.cm-1,司帕沙星药物质量浓度在6~160mg/L范围内服从比尔定律,r=0.9991。当该法用于片剂中司帕沙星的测定时,回收率为99.75%~100.00%,相对标准偏差为1.4%(n=10)。     

固溶体结构对Ca_(2-x)Sr_xZn_4Ti_(15)O_(36)∶Pr~(3+)发光性质的影响

0引言在绿色和蓝色长余辉发光材料达到应用程度之后,耐候性红色长余辉发光材料成为人们研究的重点。Eu3 、Sm3 激活的硫氧化物[1￣3]、Eu2 铝锶复合硫氧化物[4]和Y2O3∶Eu3 [5]等耐热耐水性红色长余辉材料被相继发现。Pr3 离子掺杂的碱土金属钛酸盐(M TiO3∶Pr,M=M g,Ca,Sr,Ba)是一种新型的红色长余辉发光材料。这种发光材料在615nm附近有很好的单色性红光发射。碱土金属钛酸盐基质化学性能稳定,已开始应用于场发射显示器(FE D)[6,7]。碱土金属钛酸盐是A BO3型化合物,具有钙钛矿结构。B all[8]曾通过在CaTiO3中掺入不同量的Sr2 …     

Surface chemical analysis of raw cotton fibres and associated materials

The surface chemical composition of raw unscoured cotton was successfully investigated by the surface analytical techniques X-ray Photoelectron Spectroscopy (XPS) and Time of Flight Secondary Ion Mass Spectrometry (ToF-SIMS). The presence of non-cellulosic material at the fibre surface was established and determined to be a complex mixture of fatty acids, alcohols, alkanes, esters and glycerides. The effect of scouring and bleaching was to reduce the surface concentration of these materials but even after aqueous processing some non-cellulosic material residue was still detected at the fibre surface.     

有机小分子染料和聚阳离子分子超薄膜的制备及其摩擦学性能研究

制备了以有机小分子染料酸性红 1 8为阴离子、以聚烯丙基氯化铵和聚乙烯亚胺为聚阳离子的分子沉积膜 ,用紫外可见分光光度计、接触角测定仪和椭圆偏振光测厚仪对所制备的超薄膜进行了表征 .用DF PM型动 静摩擦系数精密测定装置考察了超薄膜的摩擦学性能 ,采用扫描电子显微镜对薄膜的磨痕表面进行了观察 .结果表明 ,所制备的超薄复合沉积膜具有良好的减摩和耐磨性能     

动力学荧光增敏法测定痕量钒(Ⅴ)

研究了在稀硫酸介质中柠檬酸存在下,钒(Ⅴ)催化溴酸钾氧化吖啶红的荧光增强作用,建立了催化荧光法测定痕量钒(Ⅴ)的新方法。该方法的线性范围为0.20～3.00μg/L,检出限为0.04μg/L。本法已用于水样、大米和花生仁中痕量钒的测定。     

Covalent Structures of Phosphorus: A Comprehensive Theoretical Study

Starting from earlier work by Baudler we introduce a chemical heuristic for the systematic deduction and classification of covalent partial structures of phosphorus in polycyclic phosphanes, phosphorus-rich polycyclic phosphides, and allotropes of phosphorus except the black forms. This approach is used to direct ab initio techniques (which also confirm the rules) in the quest for as yet unknown forms of molecular or macromolecular phosphorus. Based on calculated stabilities of systematically generated structural alternatives we rationalize the stabilities of Hittorf's phosphorus and of molecular P₄, confirm the possible existence of at least one other crystalline allotropic form of phosphorus, and provide insight into the probable structure of amorphous red phosphorus. In total, the combined approach of chemical heuristics and large scale ab initio calculations presented in this work supplies a coherent chemical understanding of covalent polyphosphorus structures.     

四苯基卟啉铂电致发光性能的研究

四苯基卟啉铂(PtTPP)可以作为红光掺杂材料制备有机电致发光器件，采用的器件结构为[ITO／CuPc／NPB／BePP2：PtTPP／LiF／Al]，其中BePP2：PtTPP的共沉积膜作为发射层．实验结果表明在发射层中存在着从BePP2到PtTPP的能量传递．通过改变掺杂层中PtTPP的浓度来考察器件的性能，当PtTPP的掺杂浓度在8％(物质的量比)时，器件呈现纯正的红光发射，发射峰位于668nm，器件的效率为0．004lm／W．     

Characterisation of poly(neutral red) modified carbon film electrodes; application as a redox mediator for biosensors

The polymer redox mediator, poly(neutral red) (PNR), has been synthesised and characterised electrochemically to investigate the best electropolymerisation and mediation conditions for application in enzyme biosensors and to clarify the mechanism of action. Neutral red was electropolymerised by potential cycling on carbon film electrode substrates by allowing the monomer to be oxidised during the full 20 cycles of polymerisation or reducing the positive limit of the potential window after the first 2 cycles to impede monomer oxidation with a view to obtaining longer polymer chains and a lesser degree of branching. Comparison was made with glassy carbon substrates. The PNR films on carbon film electrodes were characterised using cyclic voltammetry and electrochemical impedance spectroscopy, as well as in glucose biosensors prepared with PNR. Glucose oxidase enzyme was immobilised by encapsulation in silica sol-gel and compared with that obtained by cross-linking with glutaraldehyde. The biosensors were evaluated by chronoamperometry in 0.1 M phosphate buffer saline solution, pH 7.0, and showed evidence of electron transfer between the enzyme cofactor flavin adenine dinucleotide and PNR dissolved in the enzyme layer competing with PNR-mediated electrochemical degradation of H₂O₂ formed during the enzymatic process. This paper is dedicated to Professor Dr. Algirdas Vaskelis on the occasion of his 70th birthday.     

Structural Characteristics of Xyloglucan – Congo Red Aggregates as Observed by Small Angle X-ray Scattering

Xyloglucan is a type of hemicellulose with a cellulose backbone containing (1→6)-α-xylose or (1→2)-β-galactoxylose as a side chain. It is soluble in water. Its aqueous solution forms a gel or gel-like precipitate by addition of Congo red. Xyloglucan gel structures with various concentrations of Congo red were observed by small angle X-ray scattering (SAXS) at the nano-level. SAXS results indicated that the xyloglucan chains interacted with Congo red, and that an increase of concentration of Congo red induced a characteristic cross-linking domain, which consisted of a flat structure containing stacked xyloglucan chain assemblies. The Congo red molecules are inserted between the xyloglucan chains.